Euroclasse A2 Fire clearcoat
Incombustible and non-flammable decorative and architectural clearcoat
Euroclass A2 – S1 D0 approved
High-strength glossy acrylic formula
Available in 1L, 5L, 25L
MSDS EUROCLASS TDS EUROCLASSE Ranking report
SUHS-A is a non-combustible and non-flammable clearcoat that does not propagate fire and has been tested and approved by a laboratory specializing in resistance and reaction to fire tests.
SUHS-A Euroclasse Fire is a clearcoat applicable in many areas, from various equipment to interior and exterior surfaces of buildings.
It is a glossy finishing clearcoat with an innovative acrylic formula (<3% VOC)
This fire-resistant clearcoat can be applied to all prepared surfaces, with a paint gun, by spraying, or by application with a roller.
Delivery: Non-hazardous product
Appearance: Whitish / transparent when dry
Density: 1.03
Application:
With a paint gun: nozzle 1.5
Mixture: ready to use
Recommended application thickness: 80-100 grams per m²
Apply one or two coats depending on the desired thickness
Respect an interval of 10 minutes of drying between each coat
Apparent drying: 30 min to the touch at 20 ° C
Complete drying: 6 hours at 20 ° C
Technical data sheet and safety data sheet available in the attached documents
Supports: metals, wood, cement and concrete, certain plastics, natural and synthetic leathers. Other materials: contact us
Fire reaction tests concern clearcoats and paints:
The M* or Euroclass classifications concern the reaction to fire (flammability, smoke, etc.)
Fire resistance tests concern certain materials
We offer a very high resistance solvent-based two-component polyurethane M1 varnish with the M1 classification (contact us by email)
We offer on this page the Euroclass A clearcoat which is a single-component, glossy, solvent-free clearcoat that meets the fire standards on all equipment and surfaces classified "CE"
The approval report for our non-combustible and non-flammable Euroclass A fire-resistant clearcoat is available in the documents attached to this page.
Euroclass Fire Resistant clearcoat (SUHS-A) Complies with EN 13501-1: 2018
Tests:
- Flame spread: Compliant
- Flaming droplets: Compliant
Ranking: A2 – S1, D0
The product, Euroclass Fire Resistant clearcoat - Reference: SUHS-A, is classified A2 based on its fire behaviour
Additional classifications:
- Smoke production: S1
- Flaming droplets and particles: D0
fire behavior | smoke production | flaming droplets | ||
A2 | S | 1 | d | 0 |
The classification is valid for the following end-use conditions
Support: Without substrate
SUHS-A Flame Retardant Varnish Classification: A2 – s1, d0 |
|
|
|
|
|
EUROCLASS reaction to fire classification according to NF EN 13501-1 | Smoke opacity (quantities and speed) S (Smoke) | Droplets and flaming debris - D (droplets) | classification M Correspondence | Combustibility | Flammability |
A1 | incombustible | non-flammable | |||
A2 | S1 | D0 | M0 | Incombustible | |
A2 | S1 | D1 | M1 | combustible | |
B | S1 | D0 | hardly flammable | ||
C | S1 | D0 | M2 | moderately flammable | |
D | S1 | D0 | M3 | easily flammable | |
|
| M4 (No Droplet) |
| ||
No customer comments for the moment.
Only registered users can post a new comment.
