AQUACEL TOPCOAT (Water based)
A solvent-based clear coat can be applied over after 24 hours of drying.
Categories
- Photoluminescent signalisation
- PHOTOLUMINESCENT BAND LLL
- Phosphorescent paints
- FLUORESCENT PAINTS
- BLACKLIGHT PAINTS
- PHOSPHORESCENT TAPES
- DECORATION
- PHOTOLUMINESCENT EMERGENCY EXIT SIGN
- SWITCHES
- STAIR NOSING
- PHOTO PAPER
- PHOTOLUMINESCENT ADHESIVE FILM
- RETRO REFLECTIVE TAPE
- Retroreflective paint
- PANEL PVC, ALU STEEL
- INFRARED INK AND X-RAY
- Phosphorescents Stones
- PRIMERS AND CLEARCOATS
- Luminescent road and cycle path
- Photoluminescent adhesives
- PHOTOLUMINESCENT PIGMENTS
- Fluorescents pigments and dyes
- Epoxy Resins and "River Table"
- Spraygun and airbrush
- Accessories
- Tactile signalization
- Protective Equipment
- Phosphorescent Papyrus
- Phosphorescent gems, pearls and jewellery
- Special effects paints
- Screen printing inks
ADHESIVE FILM
DECORATION
Versions
The AQUACEL topcoat is the best water-based clear coat available ; it can be applied over various surfaces, indoors and outdoors.
This single component clear coat (no hardener required) has high resistance to UV and weather conditions.
It can be applied using a roller or a spray gun.
Its transparency and translucent properties allow to achieve a beautiful gloss lacquered effect.
Nature of the product:
Acrylic water-based topcoat <2% solvents
Appearance:
Bright
Theoretical coverage:
3sqm/L in 2 coats
Mixture:
Ready to use. Thinning possible with maximum 5% of deionised water.
Application:
1 to 3 passes.
Tools:
Brush, roller, spray gun or airbrush
Drying:
at 20 0C for 2 min/coat or with forced air.
No customer comments for the moment.
Only registered users can post a new comment.
The blog
No RSS feed added SEE ALL POST
New products
Specials
RESIN AND PIGMENTS
