Self-adhesive corners Anti-slip adhesive photoluminescent strip in aluminum-epoxy

Anti-slip photoluminescent signalling device for horizontal application (smooth floors and stairs)

0,9mm Thick
0.4mm thick aluminum foil
coated with anti-slip photoluminescent epoxy
Weight: 85g
Dimensions: 1000mmx50mm
Appearance: Yellowish / Green in darkness
Extra Strong Adhesive 3M 300LSE
Luminance level according to ISO 17398 complying with the French applicable regulation: greater than Class C

The photoluminescent anti-slip aluminum strip has two sides:
- An aluminum face coated with a strong adhesive protected by a tab
- An phosphorescent anti-slip face (visible in darkness)

Overview of how phosphorescence works:
Arco Iris photoluminescent materials use the latest types of high luminance pigments that capture the light received during daytime or illuminance phase, and that will release a bright green colour for several hours.

The photoluminescent anti-slip tape can have several different or simultaneous uses:
- Floor marking, outlining on the ground the edges of a door / path exit,
- Photoluminescent marking of staircases
- Reducing the risk of falls in darkness or daylight
It represents an economical and efficient alternative to the aluminum stair nosing.

The 6 advantages of the aluminum / epoxy photoluminescent anti-slip strip:

1 / Aluminum + Epoxy strips offering high resistance compared with the other adhesive tapes.
2 / Ultra-fine: Thickness lower than 1mm
3/ Easy to clean and dirt-resistant (resistance to all detergents)
4 / Easy and quick to install (self-adhesive), compared with the time-consuming task of photoluminescent paint application
5 / Economical, in comparison with competing products and stair nosings
6 / Easy to cut, with a saw, a cutter blade,

How to ensure an adequate amount of light?

It is necessary to install sufficient lighting as close as possible to the strips.
Super bright: Light load sufficient after low lighting (25lux) for 15min,
After 1000Lux illumination for 5 min., phosphorescence measured at 218mcd* after 10min and 30mcd after 60min. Fading out after this period

How to apply the photoluminescent anti-slip tape and over which type of substrate?

We recommended a smooth, clean, dry, and dust-free background
(smooth concrete, PVC floors, painted floors, parquet flooring, metals, glass)