Varnish in spray 290ml

QUALITY

This product is the same than the one used by professionals for cars body/painting. It guarantees a long-lasting gloss finish and a maximum resistance against wear, rain, chemical products and gasoline.

HOW TO USE IT ?

The spray is composed of 2 parts (varnish and catalyzer) that are activated when pushing on a button on its low part. Once triggered, shake well the spray, and you have one hour to use its content.

This varnish is perfectly suitable for lustring and polishing.

COMPOSITION : High solid solvent-based acrylic varnish. 

CAPACITY : 290ml

APPLICATION : Push on the red button located under the spray and shake vigorously. Apply two coats (allow 1 to 2 minutes between each pass) in order to obtain a lacquered and glossy surface.

The secret is to find a good balance in the dosage of the passes: too thin coats will give less glow, whereas too thick coats will end up with drips ! Let dry in a place protected from dust and humidity. Touch dry in 1 hour, through drying in 24 h. 

Precautions for use : Respect well the safety instructions ! Harmful product, contains isocyanates. For professional use. Extremely flammable product.

The application to the aerosol is much less easy than gun, we strongly recommend using our spray can grip handle.