PHOTOLUMINESCENT SPRAY MARKING PAINT PHU2K

298 ml aerosol with hardener
Transportation by air prohibited


32.40£ tax incl.

Versions

PHU2K: Professional high performance photoluminescent paint


composition : Polyurethane resin and strontium aluminate.

How it works:
This slightly yellowish, colourless product is bright and colourful (green or blue-green depending on the colour choice) in the absence of light.
Its concentrated formula allows an extra long lighting power:
The more it gets dark, the more visible the phosphorescence is. Lighting effect can last for several hours, depending on the amount of light absorbed during the day
and also depending on the number of passes (up to eight coats)

Instructions:
- Prepare the surface to be painted
- Apply,if necessary, an adhesion primer or a resistant white paint.
- Trigger the catalyst cartridge located at the bottom of the spray and shake vigorously for 60 seconds.
- Apply a minimum of 3 passes, with a 5 minute interval between each coat (at 20 0C). Double that time in case of cold weather.
- Let harden at least 24 hours.

Spray version:
Spray paint allows for a practical use and a uniform painting quality, without the need to use a spray gun.
This aerosol is the "spray" version of our polyurethane marking paint PHU2K that comes in can.
It has the same composition, and is two-component based:

The aerosol has two separate chambers, containing the paint and catalyst.
When the catalyst is triggered, the mixing is done, and you can start painting.
The paint will harden within half an hour and becomes very hard after 24 hours. The aerosol is thus single-use and can no longer be used after 30-60 mins.

Use:
We recommend PHU2K paint for interior spaces and outside as well, on horizontal (floors, stairs,...) or vertical (walls, ramps, construction equipment,...) surfaces.

On what surfaces can you paint with PHU2K:
In all cases, it is recommended to paint on a white background.
(According to painting best practices, to ensure a perfect long-lasting)
On any dry and non-greasy surface, if this latter has been properly prepared and/or primed with, if necessary, a specific adhesion undercoat.


Types of background and preparation:
> Old paintings: Simple sanding
> Raw metals, plastic, glass: An adhesion primer is mandatory
> Stones, wood: Apply directly

Performance
Once dry, the paint forms a very hard and solid film, resistant to liquids, detergents and a variety of chemicals.
PHU2K paint can be exposed to direct sulight or UVs, and demonstrates an excellent resistance to high temperatures (non-flammable film, does not emit fumes)
Laboratory test reports are available.

References: Paint used for Eurotunnel.
The phosphorescent properties can last for decades without decreasing.

Precautions for use: The product is flammable and harmful: Respect safety instructions.

 

 

PHU2K varnish classified as fire-resistant
Photoluminescent varnish tested and approved according to smoke standard EN 45545 HL2

 

No customer comments for the moment.

Only registered users can post a new comment.

products related to PHOTOLUMINESCENT SPRAY MARKING PAINT PHU2K