PVC PHOTOLUMINESCENT PANELS -1.2M X 1M
Class D (very high intensity)
Product in stock / Delivery in 48 h
Costs exceptional sending (parcel unconventional)
panels and Adhesive Technical Data Sheet Panels PRICING PANEL PVC TEST-REPORT-REACH TEST M2 PVC PANELS
BLANK PHOTOLUMINESCENT RIGID PVC PANELS
CLASS D high intensity of luminescence
The PVC photoluminescent sheets glow more than 12h in complete darkness. They recharge with any source of light.
Their cutting and printing is easy and any type of ink is suitable. However we recommend the IPISS-7000 green ink.
The PVC sheets offer a good resistance to fire, sun, bad weather conditions, which make it possible to use them outside or inside buildings.
This product meets the European and French standards NF EN 1838
Class D / +50% more luminescence. Measures at 10 min : >330MCD/sqm.
Colour by day : Greenish white
Colour by night : Green
Thickness : 1.3mm
Size: 1.2m x 1m
The photoluminescent effect lasts up to 20 years.
Product in stock
Fire classification: M2
(SGS test report XMIN2602000270CM01_EN dated 25/02/2026)
The material is classified as M2 in accordance with standard NF P 92-507, which corresponds to a material that is flame-retardant but not non-combustible.
The measured ignition times (≈70 s on the underside and >110 s on the upper side) indicate adequate resistance to ignition, with limited spread of combustion.
No persistent flames or burning droplets were observed, indicating good natural self-extinguishing behaviour.
Overall, the material exhibits moderate combustibility with a low contribution to fire development.
No customer comments for the moment.
Only registered users can post a new comment.
