BLANK PRE-CUT PHOTOLUMINESCENT PVC PANELS

PHOSPHORESCENT PVC PANEL

The  phosphorescent panels are colourless during the day and emit a strong  luminescence in the dark: it's the photoluminescence effect.

They can be printed on for the production of photoluminescent markings and signals.

Other uses possible :

Communication, events panels...

Artistic achievements (paintings, engravings)…

-Thickness : 1.3 mm

-Super strong GREEN luminescence (Class D, 340 mcd/sqm  after 10 minutes)

Measures in micro candella / sqm  after a lighting of 500W / 30min

-Luminescence up to 12 hours

-Ultra fast recharge

-Lifetime up to  25 years

-Resistant,  for use indoors or outside

Fire classification: M2
(SGS test report XMIN2602000270CM01_EN dated 25/02/2026)
The material is classified as M2 in accordance with standard NF P 92-507, which corresponds to a material that is flame-retardant but not non-combustible.
The measured ignition times (≈70 s on the underside and >110 s on the upper side) indicate adequate resistance to ignition, with limited spread of combustion.
No persistent flames or burning droplets were observed, indicating good natural self-extinguishing behaviour.
Overall, the material exhibits moderate combustibility with a low contribution to fire development.

*For professionals : we can customize the printing of the panels for a quantity of minimum 100 pieces, with any kind of monochrome or multicoloured pattern regarding the safety and emergency evacuation instructions